-
E type Power Jack S(Spring return)type
72MPa(720kgf/cm2)
Designed to be lightweight and compact.
Pressure resistance test is 100% of lifting capacity, allowable lateral load is 1/20 of lifting capacity.
Sliding portion of Piston is made from copper alloy and Piston rod is made hard chromium electroplating.
Cylinder, Piston are heat treated SCM435 steels.
Port thread of coupling is NPT3/8.
E type Power Jack H (Hydraulic return) type
72MPa(720kgf/cm2)
Designed to be lightweight and compact.
Pressure resistance test is 100% of lifting capacity, allowable lateral load is 1/20 of lifting capacity.
Sliding portion of Piston is made from copper alloy and Piston rod is made hard chromium electroplating.
Cylinder, Piston are heat treated SCM435 steels.
Port thread of coupling is NPT3/8.
Install fall prevention valve to prevent the load from falling even if piping, hose gets damaged.
Consider a use of safety valve for jack, if necessary, not to block the return circuit of a double-acting jack.
For hydraulic jack with handle for hydraulic return, there are 3 items of E30H20,E30H35,E50H15.
ET type Power Jack H (Hydraulic return) type
72MPa(720kgf/cm2)
Pressure resistance test is 100% of lifting capacity, allowable lateral load is 1/20 of lifting capacity.
Sliding portion of Piston is made from copper alloy and Piston rod is made hard chromium electroplating.
Cylinder, Piston are heat treated SCM435 steels.
Port thread of coupling is Rc1/2, 3/4..
Install fall prevention valve to prevent the load from falling even if piping, hose gets damaged.
Consider a use of safety valve for jack, if necessary, not to block the return circuit of a double-acting jack.
EL type Low Profile Jack S (Spring return) type
EF type Flat Jack S (Spring return) type72MPa(720kgf/cm2)
5 series of EL types and 5 series of EF types are standardized.
Great for fine adjustments in confirmed areas or machinery installation in extremely narrow spaces.
Pressure resistance test is 100% of lifting capacity.
Select hydraulic pumps in accordance with Jack’s connected units ＆ the above required oil volume.
Receive load over the entire area of piston head and base.
Port thread of coupling is NPT3/8.
EC type Center hole Jack S（Spring return）Type
72MPa(720kgf/cm2)
1．Pressure resistance test is 100% of lifting capacity, allowable lateral load is 1/20 of lifting capacity.
２．Sliding portion of piston is made from copper alloy and piston rod is made hard chromium electroplating.
３．Cylinder, Piston are heat treated SCM435 steels.
４．Port tread of coupling is NPT3/8.
５．Even if hoses damaged, load holding valves not to fall rapidly are recommended. ( Option )
EC Type Hollow Jack H（Hydraulic return ）Type
72MPa(720kgf/cm2)
１．Lightweight, easy to handle mechanism for a lot of outside work.
２．Hollow of rod is applicable for tensioning such as wire , strand , bolt, rod
３．When attached head cap, standard hydraulic jack can use.
４．Sliding portion of piston is made from copper alloy and piston rod is 1/20 of lifting Capacity.
５．Pressure resistance test is 100% of lifting capacity, allowable lateral load is 1/20 of lifting capacity.
６．Cylinder, Piston are heat treated SCM435 steels.
７．Select hydraulic pumps matched jack’s connected units and the below required oil volume.
８．Consider a use of safety valve for jack, if necessary, not to block the return circuit of a double acting jack.
ＬＪＡ Type Aluminum Jack
（Spring return）Type72MPa(720kgf/cm2)
１．Main parts, such as tube and piston rod are made of aluminum(except 100A10)
２．Bottom and corner parts are made of steel.（except ＬＪＡ100Ａ10）.
３．Sliding portion of rod is made from hard anodized aluminum to enforce wear resistance.
４．Pressure resistance test is 100% of lifting capacity.
５．Select hydraulic pumps matched jack’s connected units and the below required oil volume.
６．Port thread of coupling is NPT3/8.
７．Consider a use of safety valve for jack, if necessary, not to block the return circuit of a double acting jack.
８．Avoid to use high frequency, lifting over limitation line.
JFN type Low Profile Jacks with Safety Nut S(Spring return）Type
72MPa(720kgf/cm2)
For replacement shoes, palcing at highway or viaduct for railway and other bridge between bridge stand and girder.
Equipped with safety nut for replacement of only shoe based on normal EF series.
Standardized each 4 types of JFN Type and JFNR Type ( tilting saddle ) from 100 ton to 300ton.
１．Receive load over the entire area of piston head and base.
２．Port thread of coupling is Rc3/8.
３．Applicable for hand operated pump or electric motor driven pump. Equipped with a safety nut for load retention.
Rod returns by spring.
Usable for minor adjustment of machinery or lifting up for narrowest space.
ＺType Power Jack Ｓ（Spring return）Type
Ｈ（Hydraulic return）Type / G（Gravity return ）Type200MPa(2000kgf/cm2)
Lightweight, compact design.
Pressure resistance test is 100% of lifting capacity, allowable lateral load is 1/50 of lifting capacity.
Piston rod is made hard chromium electroplating.
Applied to super liquid high pressure such as high pressure precision forming press, nuclear plant, ship yard, industrial diamond processing.
G Type Jack ; outer force is required when piston rod returns.
Applicable for propeller setting. 
-
TWA type Hand pump for single acting
72MPa(720kgf/cm2)
The two-stage system of high and low pressure with automatic switch-over can use Jacks for spring return and gravity return. The hand pump body is an special-steel construction designed for rough use and durability.
FPA Type Foot pump For single acting
72MPa(720kgf/cm2)
Foot operated pump by just only foot control
Hands-free operation
AB Type Air Booster Pump
72MPa(720kgf/cm2)
The pump is very compact , lightweight and reasonable.
The pump converts a compressed air supply into pressurized hydraulic flow from air piping or air bombe.
Output or release functions are activated simply by stepping on the pedal.
NEX Type Compact electric pump
72MPa(720kgf/cm2)
This small 100V or 220V pour source of hydraulic pump is lightweight and easy to transport. The two-stage system of high and low pressure with automatic switch-over has a high-efficiency action. Because when applying light loading, low pressure output operate .
Useful for driving source of hydraulic tools.
G Type Electric Pump GH１/２、１
72MPa(720kgf/cm2)
Availability for this pump as driving source of each variety application like hydraulic jacks, tools, equipments, press, Applied equipments.
The two-stage system of high and low pressure with automatic switch-over
The pumps are standardized for 6 items for single acting( R, M, E, F, H, G) and 4 items for
double acting(N, D, K, L).
Multiple valves are available for a combination of hydraulic circuits in accordance with various specifications.
1/2 horse , 1 horse
AH Type electric pump ＡH7.5、10、20
72MPa(720kgf/cm2)
Availability for this pump as driving source of efficient machine for various industry. Due to the two-stage system of high and Low pressure with automatic switch-over, when loading lightly, low pressure pump works. So, available for efficient operation.
7.5 horse , 10 horse , 20 horse , 40 horse
GX Type Electric pump GＸ１
100MPa(1000kgf/cm2)
Ideal as a hydraulic power source when installing or working on marine engines
1 horse
VZ Type Electric pump VZ2、VZ5
200MPa(2000kgf/cm2)
New material or industrial diamond manufacturing., Ultra high pressure liquid forming.
2 horse , 5 horse
PBP Type Portable Battery Pump
-
Lightweight・Compact design
Ideal as driving source for tools for operation 
-
SA Type Water Pressure Jack
-
Tap water is the working fluid. No hazardous contaminants or fire hazard.
Stainless steel materials is resistant to corrosion.
Compact jacks that can withstand 72MPa. Attached handle. Easy to carry
Water Pressure Stick Jack
-
Jack and pump combined into one unit. Use in any orientation.
TWAS Type for single acting
-
Using water as a working fluid means no hazardous contaminants and no danger of catching fire.
Water pressure hoses
-
Fittings are stainless steel. Designed for water pressure use only.
-
Shop Press KPA(Table type)
KPB(Frame type)72MPa(720kgf/cm2)
This light-weight press with hydraulic jack is for straightening.
Standardized Shop Press for capacity of 100, 200, 300kN have 2 series of frames, Table type and Frame type.
Gear Puller GP Type
72MPa(720kgf/cm2)
Use in pulling work such as pulley, gear , couplings etc.
Available both 2 and 3 jaw design. Select the gear puller for suitable work.
Pipe Bender
72MPa(720kgf/cm2)
Available for bending work for gas pipe from 1/2B to 2B.
Light weight & durable structure, frames & bending shoes are made by special aluminum.
Fine bending with cold work.
HPL type Hydraulic Pulling Jack
72MPa(720kgf/cm2)
As attached clevis ( hook ) to both sides of jack, handling is easy.
Hydraulic pulling jacks are used to pull hull blocks.
ＤＬＪ type Dual Lock Jack
72MPa(720kgf/cm2)
After pulling up or pushing out the structure, the jack can fix mechanically the structure at the required position.
Retaining the piston rod is available mechanically at the optional stroke position. 
-
Derailment Restoration Jack DRE Type , DRN Type
-
The Jacks are used for recovery when happening derailment for vehicles and train.
The Jacks works jack-up, traversing and restoring vehicles quickly as well as exactly.
Lifting Jack ＬＧ、ＬＴＧ Type
-
Lifting jack is used for lift of body in repairing or maintenance of railcar.Lot of experience for sale to various customers.
-
JJ Journal Jack
-
Journal Jack is screw jack, whole body is strong and good durability.
Application
For jack-up, jack-down ( lifting up and down for heavy load )
For positioning or adjusting of heavy load, & for bridge works
For shipbuilding works or repair & For construction or building works
For support of heavy load
AJ Aluminum Jack
-
Light weight of aluminum jack due to aluminum body
Aluminum jacks enjoy pad bearings instead of normal bearing although strength of the aluminum material is week.
Treat jack with care and avoid rough handling during use.
Application
Centering machinery works, Movement for precision machinery
Works for construction, Minor movement for heavy machinery
NJ Journal Jack with Toe
-
When lifting up and down, Journal Jack with toe is used by inserting toe at lower place.
Jack detached toe can be used as the same as Journal Jack.
Application
Setting for machinery Positioning of machine tool
Minor adjustment of heavy structure
PL Mechanical Pulling Jack
-
This jack is for only pulling with screw type.
Application
Available for pulling heavy loads.
CJ Cable Jack
-
Exclusively use for reeling in and out electric cable from cable drums.
-
WJ Type Standard Worm Gear Jack
-
This WJ is mainly used for pushing up load. Pulling force is 1/2 of pushing force.
WJ01 and WJ02 is the same as both pushing and pulling force.
Features
Applicable for operation linked more than 2 jacks and over, even if different loads, applicable for synchronized drive.
Drive source can select based on manual, electric , air motor etc.
The best way for movement or lifting of heavy loads.
Available for level adjustment or minor movement of precision machinery.
Due to self holding with screw, load can hold securely.
Big pushing & pulling force generates from small torque. And, rotation and up and down of movements are smooth with precised worm gear.
Application for the worm gear jacks cover large ranges from heavy machinery for steel rolling mill to precision machinery for paper plant.
Screw with key to prevent turning. 
-
SPD SERIES
-
Compact & high power hydraulic press is used for high pressure hydraulic pump. The press enables saving of idling stop and speed regulation with inverter as standard equipment.
Standard equipment
Color touch panel
Inverter
Electric control panel
Slide position detection device
Pressurization force detection
Option
Light curtain safety device ( front )
Safety cover
Water cooled oil cooler
HPA SERIES
-
Highly precision & high level of safety portal press.
Models ranging from 1000kN to 5000kN
Highly speed type adopted double acting cylinder
Productivity; available for forming speed according to capacity by adopting variable displacement pump.
Energy conservation; Electricity consumption is reduced at pump delivery control during idling.
Saving resources; Saving 20% of oil volume for tank
Press precision ; JIS 1 grade
Standard equipment
Color touch panel
Slide position detection device
Pressurization force detection
Two hands push button
Safety block
Water cooled oil cooler
Option
Light curtain safety device ( Front , back )
Safety cover
Die lifter , support lifter
Upper knockout
Bottom knockout
Moving table
Mechanical stopper at bottom dead center
HPC-N SERIES( Column guide type )
-
Highly versatile, high level of safety C type press.
Model ranging from 300kN - 1500kN
Available for speed control based on forming by inverter
High speed type adopted double acting cylinder
Energy conservation; Electricity consumption is reduced at idling stop by inverter control.
Saving resources; Contribute oil change cycle to protect deterioration Of working oil & lower generation of heat.
Open space is installed in backside considering work efficiency.
Standard equipment
Color touch panel
Slide position detection device
Pressurization force detection
Two hands push button
Safety block
Option
Light curtain safety device ( Front )
Safety cover
Die lifter , support lifter
Water cooled oil cooler
HPC-H SERIES ( Giv guide type )
-
Highly versatile, high level, of safety C type press
Models ranging from 300kN - 1500kN
Available for speed control based on forming by inverter.
High speed type adopted double acting cylinder.
Energy consumption; Electricity consumption is reduced at idling stop by inverter control.
Saving resources; contribute oil change cycle to protect deterioration of working oil & lower generation of heat.
Open space is installed in backside considering work efficiency.
Standard equipment
Color touch panel
Slide position detection device
Pressurization force detection
Two hands push button
Safety block
Option
Light curtain safety device ( front )
Safety cover
Die lifter , support lifter
Water cooled oil cooler
HPD SERIES
-
Highly versatile, high level of safety four columns type press
Models ranging from 300kN - 5000kN
Available for speed control based on forming by inverter.
High speed type adopted double acting cylinder
Energy conservation; Electricity consumption is reduced at idling stop by inverter.
Saving resources; Contribute oil change cycle to protect deterioration of working oil & lower generation of heat.
Press precision : JIS 2 grade
Standard equipment
Color touch panel
Slide position detection device
Pressurization force detection
Two hands push button
Safety block
Option
Light curtain safety device( front , back )
Safety cover
Die lifter , support lifter
Water cooled oil cooler
Hydraulic die cushion
Mechanical stopper of bottom dead center
HPE SERIES
-
Highly precision & safety , excellent filter press
Models ranging from 1000kN - 5000kN
High speed type adopted double acting cylinder
Productivity; available for forming speed based on pressurized force by adopting variable delivery pump.
Energy conservation; Electricity consumption is reduced by pump delivery control during idling.
Saving resources ; Tank capacity reduced 20 % due to saving generation of heat.
Press precision ; JIS 1 grade
Standard equipment
Hydraulic die cushion
Color touch panel
Slide position detection device
Pressurization force detection
Two hands push button
Safety block
Water cooled oil cooler
Option
Light curtain safety device( front , back )
Safety cover
Die lifter, support lifter
Upper knockout , bottom knockout
Multistage cushion pressure control
Moving table
Mechanical stopper of bottom dead center
HPF SERIES
-
Only can manufacturing press applicable to bending of steel plate, forming , straightening. The press has larger open space, inserting materials from backward and forward.
Models ranging from capacity ; 2000kN - 10000kN
Wider table area type.
Available for inching operation at lower speed with inverter speed control.
Energy conservation; Electricity consumption is reduced by idling stop with inverter.
Saving resources; Contribute oil change cycle to protect deterioration of working oil & lower generation of heat.
Standard equipment
Color touch panel
Slide position detection
Pressurization force device
Two hands push button
Safety block
Option
Light curtain safety device( Front , back )
Safety cover
Attachment for upper die
Water cooled oil cool
Ram head rotation type
Lifting roller in front of and behind press
Headquarter
81-6-6714-2880
81-6-6719-0909
